Description

The first Fly Rig was originally introduced in 2014. It was groundbreaking for bassists from all categories – from touring pros to hobbyists – and has been expanded into an entire series. Each Tech 21 Fly Rig is much more than a pedalboard! It’s a complete rig – and much smaller than an entire pedalboard at that. At a width of just under 30 cm and a weight of around 600 g, the slim, compact housing offers the range of functions of an entire rig.

The heart of each is the fully analog SansAmp, which allows direct connection to a PA or to studio mixers and computer interfaces. In the effects section, all the basics are available – and the possibility of doing a few unusual things as well. What you have to do without, however, are crackling patch cords, batteries running low, and hum loops. No smelly transporter, no heavy flight cases and practically no superfluous weight.

In addition, the stress of deciding what to take and what is better left at home is eliminated. No more worrying about a cheap borrowed backline or your tour rig breaking. With a Tech 21 Fly Rig, you can sit back and relax. For gigs around the world that you can only get to by plane, jam sessions at the nearest pub, and last-minute recording sessions, you’ll be the first one ready. Just pack your Fly Rig in your guitar case or backpack and it’s out the door.

That’s new:.

While the Bass Fly Rig v2 offers the same SansAmp heart and identical effects, it also features switchable SansAmp character modes:

• SansAmp Bass Driver DI is all about classic bass tube amp sounds, while VT Bass DI focuses on Ampeg-style sounds.
• Channel switching for different drive and level settings to switch from « clean » to « dirty » – or from « dirty » to « super dirty »….
• Effects loop for looping in additional outboard devices.

Features:

• Full analog SansAmp circuit to emulate a tube amplifier
• Two independent drive controls for gain and overdrive
• Two independent Level controls
• Bite switch to activate a treble boost
• Integrated active post EQ section, boost or cut by 12 dB
• Compression based on classic FET-based technology
• EFX section with octafilter, fuzz and chorus
• Chromatic tuner

Technical Features:

• 6.35 mm jack input with 4.7 MOhm for the full sound of piezos
• Input pad for active bass
• XLR output with ground connection
• Low impedance 6.35 mm jack output
• Robust all-metal housing and jacks
• Dimensions: 318 (W) x 64 (D) x 32 (H) mm
• Weight: 587 g Powered by included universal power supply with 9V DC, 100-240 V with interchangeable international plugs for use worldwide.